アブリタス VAG系の機能

AVDI基本セットには以下が含まれます:

• KWP2000 over TP2.0, KWP2000 over TP1.6, UDS over ISO トランスポートプロトコル(CAN), KWP1281あるいはKWP2000 over K-Line
• 全ECUデータ個体情報読み出し
• 全ECUのエラーコード表示、消去(DTCs)
• 出力テスト
• コントロールユニットコーディング
• 全ユニット主キャン
• ブロードキャストリクエスト
• ライブデータ
• アダプテーション
• SGO府ラッシャー (SW アップデート - モジュールのソフトウェアアップデート（SGOフラッシュ）
• OBD経由 (K and CAN)でフラシュメモリー読み込みアップデート (EDC15, EDC16全タイプ プログラム中のチェックサム計算 ME7.1.1, MED9.x, ME7.5). カウンターリセット(EDC16)
• PIN コンバーター
• TV コンフィグ ED1/ED2 - MMI TV消灯速度リミッター変更
• ダンプツール - セキュリティーアクセスコード、ダンプデータの校正など
• サービスインターバル - サービスリマインダーリセット、設定
• Service intervals reset for the models with UDS診断のモデルに対するサービスインターバルリセット
• DPF オフ ( EDC16/EDC17)
• Remote control adaptation
• ナビゲーション-  “イジェクトボタン”の可否
• クルーズコントロール - アクティブ、非アクティブ設定、( SWE) コンフィグレーション＊ SWE ユニット車両
• ブレーキパッド交換 - “パッド交換時にリアパーキングブレーキ開”, “リアバーキングブレーキ閉”, パーキングブレーキ機能テストから
• ステアリングロックアダプテーション - VW Touareg/VWPhaeton/Porsche Cayenne/Bentley Continental/Audi A8 - by CAN TP2.0 あるいは K-KWP2000

特殊機能（別途追加プログラム必要）:

イモビライザーコンフィグレーションデータIPC/ECU 

Extracting and displaying immobilizer related data by diagnostic. Ability for alignment of immobilizer related data – cluster/ecu. Displaying immobilizer related data from dump of flash and eeprom of micronas mcu in IPC

• Read/Program memory of instrument cluster immobilizer
• Read/Update immobilizer related data
• Read/Update immobilizer data in VDO dashboards with NEC microcontroller (2009+) by OBDII

インスツルメンタルクラスター/ECU校正

Reading and updating internal control module configuration memory by diagnostic. Extracting and recalibration security access code, PIN, component security bytes, current unit mileage value by K-line, CAN bus and UDS. Emergency start for engine control units EDC15, ME7.x.x.

• Cluster CAN - With this function you can establish disgnostic session with the instrument cluster using KWP2000 over TP2.0 or UDS. You can Read/Update odometer value; Read PIN code. Supported types are:- VDO/MM/Visteon -2007 (CAN TP2.0)- VDO with NEC μC 2009+ (CAN UDS)- JCI with NEC μC and 95320 EEPROM (CAN UDS)- Magneti Marelli with 9S12 μC (CAN UDS)- A8(4H)/A7(4G)/A6(4G)/Touareg(7P) with 95320 EEPROM (CAN UDS)
• Cluster K-Line - With this function you can establish disgnostic session with the Instrument cluster via K-Line (KWP1281 or KWP2000); You can Read/update odometer value; Read PIN code; Read/Update ConfData; Read ROM/Flash from the Instrument cluster; Automatic removing of "DEF error" for Audi A4 instrument cluster BOSCH RB8. Supported types are:- VDO66/86, Motometer- External Immobilizer - LT, VW GOL, VW O GOL( Kostal ), Siemens 6 PIN HC05 Immo/TMS- Audi A4 B5 with/without board computer -1997- Audi A6 -1997- Audi A8 -1999- Magneti Marelli - Shadow 1/2/3/Direct- VW Sharan/Galaxy -2000- Audi A4 Bosch RBx/RB4/RB4 Crypto/RB8 Crypto 2004+- Golf 4 Bosch RBx- VW Phaeton/Touareg, Bentley Continental, Porsche Cayenne- Seat Exeo Bosch RB8 Crypto 2008+- Lamborghini Gallardo -2005/2005+
• Reading security access code of the IMMOBILIZER by CAN bus
• Read/Update ConfData (VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic ME7.8.) - Extracting Security access code / PIN (EDC15, ME7.x, VAG-Cartronic ME7.8) - Extracting Component security bytes (EDC15, ME7.x, VAG-Cartronic ME7.8)- Mileage Calibration (EDC15, EDC16)

ECU 追加診断機能

Extracting and displaying PIN code, control module configuration memory content, component security data from engine control units EDC16, MED9.x, Simos PPD 1.1/1.5, Magneti Marelli 4HV,7GV. Emergency start for engine control units EDC16. The whole EEPROM could be read for EDC15/ME7/EDC16. For MED9, EDC17 and Simos engine control units only the PIN/CS/MAC is displayed.

エアバッグモジュール- 追加診断機能

Advanced Diagnostic Functionality - Ability to manage stored crash data and configuration memory of electronic control unit. Read/Update Config Data of airbag control units Siemens (CAN bus - ISO15765). Audi A6/Q7/Allroad, VW Golf5..., Skoda Octavia II ..., Seat Altea ... With this special function you can Read/Update ConfData memory of the airbag module. Clear the crash data of the airbag module. Covered units for Read/Update ConfData:
1. All Siemens CAN Airbags 2003-2008 like 4F0959655B (Audi A6/Q7/Allroad 2003-2008),
1K0909605AB, 1K0909605C, 1K0909605AD, etc...
2. K-Line Airbags (Siemens and Bosch) - 1C0 909 605 C, 8L0 959 655 A, 1J0 909 609, 6Q0 909
605 C,6Q0 909 605 A, 6Q0 909 605 B, 3B0 959 655 B, 1C0 909 605 F, 1C0 909 605 H, 1J0 909
607, 1J0 909 603, 4B0 959 655 C, 4B0 959 655 J, 4D0 959 655 C, 8L0 959 655 F,8A0 959 655
C, 8A0 959 655 K, 8A0 959 655 K, 4D0 959 655 H, 8D0 959 655 C, 8D0 959 655 L

ECU コンポーネントプロテクションデータ

Extracting by diagnostic and displaying PIN, component security data and MAC – EDC17, MED17

BCM2 キープログラミング（OBD経由）

This function will allow the preparation of a key ready for adaptation by diagnostic to the vehicles with BCM2 – Audi A4, S4, RS4, A5,S5, RS5, A6, A7, A8, Q5 / VW Touareg

キーアダプテーションと登録

Guided key adaptation functions, preparation keys suitable for the vehicle (dealer’s keys). Included are also Audi A6, Audi Q7, Audi Allroad, VW Crafter(with EDC16 ECU), VW Passat, (BCM2 based vehicles are supported only with the help of ABProg*)

• Key programming/adaptation
• Reading security code (PIN) and component protection by OBDII - VW CRAFTER
• EZS - Kessy (Q7/A6/Allroad) - With this function you can prepare dealer key/learn dealer key- Read/Update ConfData from EZS - Kessy (Q7/A6/Allroad)
• Programming keys by OBDII (VAG with 16 bytes Component Security) - VW Crafter, Audi R8, VW Golf 6, VW Multivan 2009+, VW EOS 2009+, VW Caddy 2009+, VW Scirocco, VW Polo 2009+, VW Bora 2010+, VW Jetta 2010+, Skoda Octavia II 2009+, Skoda Superb 2009+, Skoda Fabia 2009+, Skoda Yeti 2009+, Seat Leon 2009+, Seat Altea 2009+, Seat Exeo 2009+, Seat Ibiza 2009+, ...
• Extracting of the 7th byte Component Security from a working key of the car (Megamos, Hitag2)
• LAMBORGHINI GALLARDO

コンポーネントプロテクション ( 1/2世代)

This function will allow adaptation of used electronic control units in the vehicle. Audi A8, A6, Q7,Allroad, A4, A5, Q5.
Component protection generation 1
Control Head (MMI2G)                 - Audi A4/A5/Q5 2008+
Media Player 1 (MP3 CD Changer 2G)   - Audi A4/A5/Q5 2008+
Control Head (MMI)                   - Audi A6/Q7 2004-2009
Central electric (ILM Fahrer)        - Audi A6/Q7 2004-2009
Media Player 1 (MP3 CD Changer)      - Audi A6/Q7 2004-2009
Auxilary Heater                      - Audi A6/Q7 2004-2009
ILM Front passenger ((ILM Beifahrer) - Audi A6/Q7 2004-2009
Seat Memory Passenger                - Audi A6/Q7 2004-2009
Memory module (driver's seat)        - Audi A6/Q7 2004-2009
Instrument Cluster                   - Audi A8    2003-2006    By OBDII
Climatronic / Auto HVAC              - Audi A8    2003-2010
Seat Memory Passenger                - Audi A8    2003-2010
Memory module (driver's seat)        - Audi A8    2003-2010
Comfort module                       - Audi A8    2003-2010
DSP Bang & Olufsen                   - Audi A8    2003-2010
ILM Front passenger ((ILM Beifahrer) - Audi A8    2003-2010
 
Component protection generation 2
EZS-Kessy         Audi A6/Q7 2004-2009 by OBDII
Comfort module     Audi A6/Q7 2004-2009 by OBDII
Climantronic         Audi A6/Q7 2004-2009 by OBDII
Airbag            Audi A6/Q7 2004-2009 by OBDII
Airbag          Audi A4/A5/Q5 2008+ from Bosch by OBDII
Instrument cluster    Audi A6/Q7 2004-2009 by OBDII
Instrument Cluster    Audi A4/A5/Q5 2008+ by OBDII
Infotainment electr.  Audi A4/A5/Q5 2008+ by OBDII

- All other modules (e.g. DSP) with component protection generation 2
for A6/Q7 2004-2009 and A4/A5/A5 possible only if you have dump from gateway from where module was originaly build

ECU アダプテーション（OBD）

Adaptation of engine control units to the vehicle - EDC16, EDC17, MED17, MED9, Simos PPD, ME7.5.20, ME7.5.30. Kessy - Audi A8/VW Touareg/Phaeton. Comfort module - VW Passat B6/CC. Transmission gearbox - Audi A6/Q7/Allroad/A8. EZS Kessy - Audi A6/Q7/Allroad. BCM2 immobilzier and Electronic Steering Lock (ELV) - Audi A4, S4, RS4, A5,S5, RS5, A6, A7, A8, Q5 / VW Touareg.

ECU EDC17/MED17 プログラマー（ブートモード）  

Full access to the memory through boot-mode (CAN bus)

Read/Update EDC17/MED17 eeprom/flash memoryRead PIN/CS/MACMake immobilizer bypass ( in the eeprom and in the flash)Recalibration of control unit mileage for ECUs - EDC17/MED17Transfer PIN/CS/MAC from one EDC17/MED17 to anotherFix the check sums in flash.

EDC17/MED17 ダイレクト PIN/CS 

The function is dedicated explicitly to read the PIN and CS of the EDC17/MED17 engine control units. With this function is possible to read even engine control units 2012+ which are with
updated software and is not possible to read normally by OBDII.With this special function the EDC17/MED17 is not read through OBDII – you should have direct connection to the engine
control unit. It is possible to make this on the table, you need to connect only 12V, GND, Ignition, CAN-H and CAN-L. It is possible to read the ECU also in the car, but you need to find
somewhere the CAN-H (orange-black) and CAN-L (orange-brown) wires. So connect them to the AVDI and you will be able to read the engine control units.

NOTE: This function requires internet access

トランスミッション A4/S4/RS4/A5/S5/RS5/Q5 2007+, A6/S6/RS6/A7/S7/A8/S8 2010+, VW Touareg 2010+ アダプテーション 

This function is dedicated to adapt the transmission control unit (TCU) to the immobilizer (BCM2). For that purpose is necessary first to read the TCU. The TCU is not possible to be read by OBDII,
but is possible to read it when you connect the TCU on the table, or when you connect the AVDI to the internal CAN-Bus of the car.
To read from the internal CAN-Bus, find the orange/black and orange/brown CAN wires and make the following connection of the AVDI:
- orange/black <-> CAN-H (PIN6 of the OBDII)
- orange/brown <-> CAN-L (PIN14 of the OBDII)
- Ground <-> GND (PIN4 of the OBDII)
- 12V <-> 12V (PIN16 of the OBDII)

NOTE: This function requires internet access

Read Simos PCR 2.1 エンジンコントロールユニット

This function is dedicated for reading the PIN/CS/MAC of the Simos PCR 2.1 engine control unit.

NOTE: This function requires internet access

BCM2全キー紛失(Audi A6/A7/A8, VW Touareg)